HuaLi-CCEC Series Generator Set
The HuaLi-CCEC series generator set is Huali's heavy-duty Cummins integration—the tier of its portfolio built around Chongqing Cummins (CCEC) engines, positioned above the light-to-medium-duty DCEC-based sets and below the purpose-built high-voltage mining lines. Where the HuaLi-DCEC series serves commercial and light-industrial standby power in the tens to low-hundreds of kilowatts, the CCEC series moves into prime and continuous duty at several hundred kilowatts to over a megawatt, anchored in engine platforms that CCEC has manufactured in Chongqing since 1995 as Cummins' principal Chinese base for large-bore, heavy-duty power.
The CCEC engine foundation. CCEC produces the N, K, and M series diesel engines, covering 11–50 L displacement and a generator-drive power band conventionally described as 200–1,600 kW. The platform hierarchy within that band is explicit. The N series (NT855, 14 L inline-6) covers roughly 200–320 kW, the M11 (10.8 L inline-6) sits in the 250–300 kW range, the K19 (19 L inline-6) spans 400–600 kW, the K38 (38 L V12) covers 640–1,000 kW, and the K50/QSK50 (50 L V16) extends into the 1,200–1,800 kW territory. CCEC's own stated output range for its engine business is 145–1,343 kW, while generator-set packagers commonly rate complete CCEC-based units to 1,500 kW and above depending on configuration. The engineering signature across these platforms is Cummins' PT fuel system (mechanical on legacy N and K variants) or high-pressure common-rail electronic control on later QSK models, paired with Holset turbocharging and, on many ratings, air-to-air aftercooling—a combination oriented toward fuel efficiency under sustained heavy load and structural durability in high-vibration environments.
Huali integration and representative ratings. Huali assembles CCEC engines with Stamford-design brushless alternators and its standard control architecture, marketing the results under the HL-series model convention. Documented configurations include the HL900GF, rated at 900 kW prime / 990 kW standby, powered by the CCEC KTA38-G4; and the HL1100GF, rated at 1,100 kW prime / 1,210 kW standby, powered by the KTA50-G3. Lower in the band, the HL200GF (200 kW), HL250GF, HL350GF, and HL400GF appear in CCEC-series parameter listings, and Huali's CCEC OEM line includes 600 kW units on the KTA38-G2 platform. These are open or sound-attenuated (silent) configurations rather than the containerized high-voltage mine sets; the electrical output is standard low-voltage three-phase, with voltage and frequency regulation held to ±1% in steady state on the larger units and PLC-based auto-start/auto-mains-failure control as standard.
Mining relevance and the heavy-duty envelope. The CCEC series is not Huali's dedicated mine-safety platform—that role belongs to the high-voltage, explosion-proof-capable lines described separately. But CCEC engines carry a documented heavy-duty and mining pedigree that makes the series a natural fit for mine-site prime power, crusher and conveyor loads, dewatering, and remote off-grid industrial sites where the requirement is sustained output under shock loading rather than underground safety certification. CCEC's K38/QSK38 is explicitly characterized in the Chinese market as the "large-power mainstay for mining" , with strong torque reserve for long-duration full-load operation, and CCEC engines broadly are deployed across mining, construction, oil and gas, and fixed/mobile generator stations. Huali's own mining-dedicated solution framework—which specifies multi-stage dust filtration, reinforced vibration-isolating bases, cold-climate preheating, high-altitude power recalibration, 0–100% step-load acceptance, and 24-hour continuous operation—is described as applicable to its mining genset range broadly, and CCEC-powered units fall within that envelope where the application does not require the high-voltage architecture. For a large open-pit or remote industrial site that needs 600–1,200 kW of reliable prime power without the mine-distribution voltage interface, the CCEC series is the conventional Cummins-heavy-duty answer within Huali's catalog.
Huali Electromechanical Single Machine Self Start Control System HLCS-X12
The design of Huali self-starting control system HLCS-A12 through many years of generator setdesign experience,and many diesel generator set control design experience, fuly considering the prob-lems in the use of diesel generator sets in various mining areas, according to the reliable, efficient andsimple design principles, The system is simple to operate and reliable to run.
This system increases the detection and protection of mains power, once the abnormal phenome-non of mains power, it can automatically control the diesel generator set to start in order to shorten theuser's reaction time, At the same time, it is equipped with functions such as external charger of thebattery to ensure the battery power of the generator set when starting.
This system is the second version of Huali self-starting system, which retains the original exteriordesign, upgrades the core controller and supporting electronic components, including the panel opera-tion retains the original power normal indicator light, emergency stop button and fault alarm buzzer. Theappearance of the controller is more beautiful, the display is clear and the performance is more stable.
1.HLCS-A12 Original Lmport Britain Deep Sea DSE7320MKll Controlling System
The DSE7320 MKll is a powerful new generation self-starting controller with powerful functions andfeatures,lt is suitable for a variety of diesel or gas generator set stand-alone applications and user-friendly.Dual-core processor and large memory make data processing faster, no malter how complex the applicationcan respond quickly.

2.HLCS-A12 Original Lmport ComAp AMF8 Controlling System
AMF8 Controlling System. Single generator set controller for regular or standby controller, it is all-in-one intuitive and powerful POtool for local or remote configuration setup, monitoring and control, easy to instal, configure and use.

3,HLCS-C12 Domestic Manufactured Equipment Smartgen HGM6120CAN Controlling System
The power station automation controller is used for the automation and monitoring system of a single diesegenerator set to realize the automatic startup/shutdown of the generator set, data measurement, alarm protec-tion and 'three remote' functions, The controller adopts liquid crystal (LCD) graphic display, it can displayChinese, English and other languages, and simple operation, reliable operation.

Generator Room Design






